PT. ERA MITRA PERDANA

PT. ERA MITRA PERDANA

Scientific, Laboratory Equipment & Service

WELCOME TO PT. ERA MITRA PERDANA

Established in Jakarta in 1999, PT. Era Mitra Perdana is one of the authorized and representative dealers in Indonesia for Scientific and Laboratory Equipments. Since the beginning, we have committed to our customers to provide top quality products with competitive price and fully guaranteed with the best service, open communication and proactive to give suggestion and alternate solution according to the customer request and need
whenever you need anything for your lab, please do not hesitate to contact us.


WILL BE PARTICIPATING

https://oemfile.informamarkets-info.com/FileUpload/2020LAB/20191111161250652.jpg


VISIT US AT BOOTH N11



LOOKING FORWARD TO MEET YOU THERE.



FEATURED PRODUCT

Chip DSC

The All new Chip-DSC integrates all essential part of DSC, furnace, sensor, and electronics in a miniaturized arrangement. The chip-arrangement comprises the heater and temperature sensor in a chemically inert ceramic arrangement with metalic heater and temperature sensor. This arrangement allows superior reproducibility and due to the low mass outstanding temperature control and heating rates of up to 1000 K/min. The integrated sensor is seasily user exchangeable and available at a low cost. The integrated design of the chip sensor delivers superior raw data. which enables a direct analysis without pre-or post processing of heat flow data Linseis »  DSC (Differential Scanning Calorietery) »  Chip DSC

ChemiSorb HTP - High Throughput Chemi Analyzer

Chemisorb HTP - High Throughput Chemi Analyzer Optimum design and efficient utilization of catalysts require a thorough understanding of the surface structure and surface chemistry of the catalytic material. Chemical adsorption analyses can provide much of the information needed to evaluate catalyst materials in the design and production phases, as well as after a period of use.Optimum design and efficient utilization of catalysts require a thorough understanding of the surface structure and surface chemistry of the catalytic material. Chemical adsorption analyses can provide much of the information needed to evaluate catalyst materials in the design and production phases, as well as after a period of use. Micromeritics »  Chemisorption »  ChemiSorb Series

AutoChem HP - Extended High Pressure Chemisorption

AutoChem 2950 HP - Superior Performance Under Extended Pressure. Micromeritics’ AutoChem 2950 HP Chemisorption Analyzer is an automated high-pressure catalyst characterization system that is capable of preparing and analyzing samples at elevated pressures up to 1000 psia and at temperatures from -100 to 1100 °C. The instrument can perform a variety of experiments including pulse chemisorption, BET surface area, temperature-programmed reduction (TPR), desorption (TPD), oxidation (TPO), and reaction analyses. Micromeritics »  Chemisorption »  AutoChem Series

THB (Transient Hot Bridge)

The Linseis Transient Hot Bridge – Thermal Conductivity Meter enables thermal conductivity, thermal diffusivity and specific heat measurements on various sample geometries and materials. This Linseis measuring instrument provides the three material properties simultaneously after just a few minutes time regardless of whether you have used the patented sensor in a solid matter (incl. bulk material, gels, pastes) or in a liquid. The preparation of solid samples is pretty simple: One pla-ne surface of two sample halves is sufficient for the sensor. Reference or calibration measurements are a thing of the past. As a matter of course, the THB measures absolute values, with an uncertainty which is not behind that of conventional plate or our laser flash devices. Different sensors, easily to be exchanged, are available for laboratory and field use. The THB measures fully automatically. Its software control optimizes the measurement process independently, aiming at a short duration and a minimum uncertainty. Linseis »  Thermal Diffusivity & Thermal Conductivity »  Thermal Conductivity

HFM (Heat Flow Meter)

The LINSEIS Heat Flow Meter provides a rapid and easy to use instrument to determine the thermal conductivity properties of low thermal conductive insulation materials as well as all other materials with a high level of accuracy. The thermal conductivity instrument design is based on ASTM C518, JIS A1412, ISO 8301 and DIN 12667. The principle of measurement is to position a sample between a hot and a cold plate and to measure the heat flow. The LINSEIS Heat Flow Meter is a robust and reliable instrument. Its unique design enables highly accurate measurements within minutes. The system provides an excellent long term stability enabling precise long term aging studies. Fast measurement cycles as little as 15 minutes can be achieved, resulting in a high sampling rate. To enable these fast and precise sampling intervals, the heat flow meter uses a dual sensor arrangement. An integrated length measurement provides immediate sample thickness data. Linseis »  Thermal Diffusivity & Thermal Conductivity »  Thermal Conductivity

LAST UPDATE

CONTACT US

PT. Era Mitra Perdana

Head Office - Jakarta
Ruko Buaran Persada No. 31
Jl. R. Soekamto Duren Sawit Jakarta 13450, Indonesia
Telp: +62-21-86612458; Fax: +62-21-86612365
E-mail: sales@eramitra.co.id

Surabaya Office
Jl. Kebon Sari V No. 7G - Surabaya ; Telp : 0878 5341 2772